Insert the disk that contains the B Check for references to C: Requires a decimal number having a value ranging from 0 to If neither keyword is used, the network adapter defaults to auto-negotiation mode. When running Setup for Microsoft Network Client v3.
|Date Added:||6 January 2006|
|File Size:||8.13 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Insert the disk that contains the B Create the appropriate Autoexec.
Broadcom NetXtreme Ethernet Controller Driver for DOS NDIS2 Driver – TechSpot
The DevNum keyword value, which represents the assigned device number, is a broqdcom number ranging from 0 to Do not use these keywords unless you know how to configure PCI devices. Requires a decimal number having a value ranging from 0 to Windows NT Server 4.
This file is located on the installation CD. The NodeAddress keyword specifies the network address used by the adapter.
The Duplex keyword is used to force the duplex mode of the adapter. These keywords are used concurrently and are included for manufacturing purposes. When running Setup for Microsoft Network Client v3. When ndus2 keyword is used, the LineSpeed keyword must also be used. These keywords are listed below:.
Broadcom NetXtreme Ethernet Controller Driver 15.0.1 for DOS NDIS2
Using Keywords for the B If 2 or more adapters that have a good link have the same Device ID, the NDIS2 driver software loads on the adapter that is located in the slot having the lowest bus number.
A PCI device scan utility is needed to find this information.
The LineSpeed keyword requires a decimal number and of either 10,or Specifies the duplex mode of the network adapter. If the driver fails to load, an initialization fail message is displayed. Requires the decimal number 10, or OS2 files, and then ndiz2 OK.
When the Duplex keyword is used, the LineSpeed keyword must also be used. Do not use them unless you are familiar with how to configure PCI devices.
Broadcom NetXtreme Gigabit Ethernet – NDIS – Windows 7 Service –
Open a command prompt window and change the directory to C: Specifies the number of the PCI bus on which the network adapter is located. If neither keyword is used, the network adapter defaults to auto-negotiation mode. The FuncNum keyword value, which represents the function port number of a multiport adapter, is a decimal number, with 0 representing the first broadcomm, and 1 representing the second port. If a multicast address or a broadcast address is specified, the adapter uses the default MAC address.
Type expand -r ncadmin.
The LineSpeed keyword is used to force the speed of the nettreme connection. After creating the startup disk, follow the instructions in Modifying the Startup Disk. For the sake of simplicity, the driver performs auto-negotiation when the line speed is set to a value of Alternatively, use Broadcom Advanced Control Suite 2 see Broadcom Advanced Control Suite 2 to view the bus number, function port number, and device number assigned to each adapter Windows users only.
Specifies the network address used by the network adapter. Requires a decimal number having a value ranging from 0 to 7. These files are located on the installation CD.